Standalone Compact GPON OLT
FEATURES
- Available with up to 12 x GE and 2 x 10G interfaces, or 8 x GPON ports
- Up to 1:128 split ratio, 20km transmission distance and 1,024 ONUs per full-load 1U chassis
- support upstream wavelength 1310nm and downstream wavelength 1490nm, 1550nm
- VLAN, QinQ, QoS, DBA
- Link diagnostic, port backup/isolation/protection/monitoring, bi-directional FEC
- ARP, DHCP relay, DHCP v4/v6, IGMP snooping v1/v2, IPv4, IPv6
- Support complete ACL, including L2, L3, L4, customized ACLs and port-based mirroring
- Anti-DDoS, RADIUS, TACACS+, Storm control
- Service classification per port/VLAN/CoS (DSCP)
- SP, WRR, DRR and SP+WRR scheduling modes
- SFP digital diagnostic (DDM), FAN, CPU, voltage and temperature monitoring
- 1545~1565nm operating bandwidth for optical amplifier
- Insertion loss: Max. ≤0.8dB
- High performance, high reliability
- Polarization dependent gain: 0.4dBm
- Polarization mode dispersion: 0.5ps
- Input and output pump leakage: -30dBm
1550nm output optical port, multiplex 1310/1490nm data stream
Efficient space, flexible installation and easy operation
- CE and RoHS compliant, RMON I and II standards
- CLI, Telnet, SSHv2 and SNMP (NView compatible)
Sub-cards
- ISCOM5508-GPSC, Slot 1, MCU, 2 x 10GE(SFP) , 2 x GE (SFP), 2 x GE (RJ45), and 4 x GPON SFP ports, 1 Console interface for local management and 1 SNMP out-of-band management interface
- ISCOM5508-GP4A, Slot 3, GPON line card, 4 x GPON SFP ports
- ISCOM5508-WDFA4, slot 2 or 3, EDFA+WDM card, 1 x CATV Input (1550nm, SC/APC), 4 x GPON Input (1310nm, 1490nm, LC/PC), 4 x Output (Triple-wave, LC/APC)
- ISCOM5508-GE4B, Slot 2 or 3, GE Card, 4 x GE SFP ports
Outdoor GPON OLT
FEATURES
- Adopt cast aluminum shell, and provide 1 GPON OLT card, 1 EDFA card (embedded WDM is optional), and power supply
- Optionally support 4 or 8 ways GPON ports
- Provide two 1000Mbit/s electrical interfaces, two 1000Mbit/s optical interfaces, and two 10Gbit/s optical interfaces in the uplink
- 2 ways of 1550nm CATV optical signal input for link backup and protection
- Embedded dual power supply redundancy for improving device reliability
- Wide-temperature design for adopting to the -20 to 65°C environment
- IP67 protection level, thus meeting dustproof and waterproof requirements in the outdoor environment
- Debugging through the Console interface via Bluetooth, thus facilitating maintenance after installation
- Powerful VLAN features, including selective QinQ, VLAN mapping and aggregation
- Complete QoS, including DBA, priority control, multiple traffic classification mechanisms, and queue scheduling
- Complete ACL, including L2, L3, L4, and user-defined ACL
- Static route, Static multicast, IGMP Snooping, IGMP Proxy, IGMP MVR, and controllable multicast
- STP/MSTP, link aggregation, DHCP, interface isolation, and other common features
- Low power consumption of the MCC and EDFA card, with overall power consumption less than 85W, energy saving
- Multiple maintenance and management interfaces, supporting in-band and out-of-band management
- Rich alarms, such as door alarms, abnormal optical power alarms, and ONU offline alarms
CLI, Telnet, SSHv2 and SNMP (NView compatible)
GPON SFU ONT
GPON HGU ONT
Standalone CATV EDFA
FEATURES
1540nm~1565nm operating bandwidth for optical amplifier
- Low Noise Figure: ≤5.5dB,(@Pin=0dBm, λ=1550nm)
- High performance, high reliability
- Polarization dependent gain: 0.4dBm
- Polarization mode dispersion: 0.5ps
- Input and output pump leakage: -30dBm
- 1550nm output optical port, multiplex 1310nm/1490nm or 1270nm/1571nm data stream
- Can be compatible with any FTTx PON Technology: EPON/GEPON, GPON, BPON, DPON and XGPON
- Perfect RS232, SNMP
Efficient space, flexible installation and easy operation